The custom transit tunnel above is specially designed for the cleaning of impellers of fuel pumps. The intention is to remove the oils and chips on these impellers.

Execution

This transit tunnel is equipped with automatic transport which automatically conveys the impellers from the entry to the exit of the conveyor belt of the machine. The parts automatically fall at the end of the exit into boxes through the discharging casing.

Working procedure

The impellers are transported through the conveyor into the charging casing of the machine. Then the impellers are loaded on the conveyor chain which moves the impellers one position each time.

The impellers are first washed, then rinsed and finally dried. After drying, the impellers are at the end of the conveyor chain and automatically fall into the discharging casing.

If at the end of the machine a box is present, the slide of the discharging casing will open each time there is a part, until the box is full.

Once the box is full, the discharging casing closes and the full box moves to the exit of the box transporter and a new box will be placed (if present).

Technical specifications

TypeDVBA RVS-W/E 2-tanks
DimensionsSee mechanical drawing
Wash tank814 L.
Rinsing tank410 L.
Weight machine± 2500 kg
Max. consumption electric47 kW – 80 A
Max. pressure compressed air10 bar
Max. pressure water6 bar
Pressure wash pump 12 bar
Flow wash pump 113,8 m³/hour
Pressure wash pump 230 bar (max. 50 bar)
Flow wash pump 20,48 m³/hour
Pressure rinsing pump1,8 bar
Flow rinsing pump3,6 m³/hour